Platinum Q Salt

This system is used to produce bright and highly adherent deposits of low stress and low porosity platinum. It has the added advantage of being non-toxic and non-explosive.

Availability 
Platinum Q Salt® plating solution Pt 5Q
(Product code - 155050)
Platinum Q Salt® replenisher (pH 10 adjusted) Pt 20Q
(Product code - 155057)

Bath preparation 
The bath is supplied as a solution containing 5 g/l of platinum. This solution will have a pH of 10.2 - 10.8 at 20°C. The bath should be heated to the operating temperature of 91°C - 93°C, and the pH adjusted to the working range of 10.0 - 10.6 (optimum 10.5). This adjustment can be made by the addition of ammonia to increase the pH. Regular addition of demineralised or distilled water is necessary in order to maintain the volume of the bath.

Replenishment
The platinum concentration of the bath should be maintained between 4 g/l and 6 g/l by adding Platinum Q Salt® Pt 20Q replenishing solution as required.

Metal preparation
Components should be degreased and cleaned by means of a procedure appropriate to the substrate in question. The bath has been used to plate copper, gold, nickel, titanium, stainless steel and super alloys.

Plating conditions
Cathode current density: 0.2 - 0.7 A/dm2 (optimum 0.5 A/dm2)
It is important to maintain the stated temperature range. This is because the cathode current efficiency is substantially reduced at temperatures below 89ºC. Regular checks are essential to ensure that the recommended pH range is maintained.

Chemical formula
[Pt(NH3)4](HPO4)

Product codes
UK: 155050
US: C1046
CN: FM01PT0009
This product can be ordered worldwide under the above product code

CAS number
127733-98-6

Product family
Pgm compound solution (aqueous)

Process
Electroplating

Market
Aerospace

Get in touch

Sondra Morris

Sondra Morris

Americas

  • +1 856 384 7000
Send a message
Aaron Brooker

Aaron Brooker

Europe

  • +44 (0)1763 256 009
Send a message
Steve Tam

Steve Tam

Asia

  • +852 2738 0380
Send a message