Fluxes

Working Range: 450 - 650oC 

An active chloride based aluminium brazing flux with corrosive flux residues.  ALU-FLO^TM No. 1 Flux Paste is used for its excellent dispensability and for brazing aluminium <620˚C.

It is recommended to use with aluminium silicon/ALU-FLO HT filler metals.

Working Range: 575 - 650oC

An active fluoride based aluminium brazing flux with non-corrosive flux residues.  ALU-FLO No. 2 Flux Powder is used for its excellent dispensability and for brazing aluminium <600˚C.  

It is recommended to use with aluminium silicon/ALU-FLO HT filler metals.

EASY-FLO Flux Powder is a globally renowned white silver brazing flux powder. It is a leading brand flux popular with both distributors and end users.

EASY-FLO Flux Powder is used on most common engineering metals (excluding aluminium). It is an excellent flux pick-up onto warmed brazing rod when using ‘hot-rodding’ technique.

It can be used on stainless steel at <700˚C.

Other
MSRR9500/124

EASY-FLO 100 Flux Paste is an excellent smooth white general purpose silver brazing flux. It is also sold as MATTIFLUX™ 100 Flux Paste in certain markets.

It is used on most common engineering metals (excluding aluminium) especially for ferrous materials

EASY-FLO Low Temperature Grade Paste is a thin smooth white paste. It is a general purpose silver brazing flux also marketed as EASY-FLO Dipping Grade Flux Paste.  It is used on most common engineering metals (excluding aluminium) and on copper and copper alloys.

EASY-FLO Low Temperature Grade Paste is recommended for induction heating and rapid heating cycles.

Its application is done by dipping of components.

This is a white general purpose silver brazing flux paste. It is intended for use with low silver content filler metals and on components where brazing times will be protracted.  

EASY-FLO Medium Temperature Grade Flux Paste is used on most common engineering metals (excluding aluminium) and with lower silver content filler metals. 

It performs well with extended heating and at the top of its working range.

EASY-FLO High Temperature Grade Flux Paste is a silver brazing flux, which performs well with extended heating and at the top of its working range.

It is used on most common engineering metals (excluding aluminium). It has good ‘temperature-time stability’ and overheat resistance.

EASY-FLO High Temperature Grade Flux Paste is well recommended for vertical hold on components.

Other
MSRR9500/136

This is a white general purpose silver brazing flux paste. It is intended for use with low silver content filler metals and on components where brazing times will be protracted.  This flux conforms to EN1045 FH10.

A general purpose silver brazing flux powder, which offers improved fluxing on stainless steel when used with brazing filler metals with a liquidus temperature up to 725˚C.

EASY-FLO Stainless Steel Grade Flux Powder is recommended where a higher fluoride content boosts activity. It is also suitable for most common engineering metals and on certain aerospace work.

Other
MSRR9500/125

A general purpose silver brazing flux paste, which offers improved fluxing on stainless steel when used with brazing filler metals with a liquidus temperature up to 725˚C.

EASY-FLO Stainless Steel Grade Flux Paste is recommended where a higher fluoride content boosts activity. It is also suitable for most common engineering metals and on certain aerospace work.

Other
MSRR9500/125

A specialised silver brazing flux for aluminium bronze and copper alloys with 2-10% aluminium where standard fluxes are unable to dissolve surface aluminium oxide.

EASY-FLO Aluminium Bronze Grade Flux Paste is recommended for silver brazing of aluminium bronze and copper alloys where the formation of aluminium oxide prevents standard fluxes from working successfully.

Other
MSRR9500/121

Soft Solder Flux 1S is a highly active liquid flux recommended for use on stainless and carbon steels, and is active up to 350°C where it possesses good wetting and spreading properties. The flux may also be used on non-ferrous alloys where there is a need for an active flux.

Soft Solder Flux No. 2S is a flux with reasonable wetting properties up to 300°C. It is particularly effective with the tin based soft solders such as P5™ and LMl0A™. Soft Solder Flux No. 2S is a liquid intermediate / semi-corrosive flux for use on copper and brass.

Soft Solder Flux No.3S is a paste flux active up to at least 350°C. It is widely used on carbon and stainless steel with solders such as P5™ and LMl0A™ and is effective on copper and brass with all solders including LM5™ and A5™.

TENACITY No.6 Flux Powder is a brown boron modified flux for use on tungsten carbide and materials containing refractory metals. It has superior fluxing activity to many other products of its type.

It is recommended for improving wetting of the filler metal on cemented tungsten carbide.

It is also used for tungsten carbide backed PCD and for grades of cast iron.

Other
MSRR9500/127

TENACITY No.6 Flux Powder is a brown boron modified flux for use on tungsten carbide and materials containing refractory metals. It has superior fluxing activity to many other products of its type.

It is recommended for improving wetting of the filler metal on cemented tungsten carbide.

It is also used for tungsten carbide backed PCD and for grades of cast iron.

Other
MSRR9500/127

TENACITY No.5A Flux Powder is designed for use on stainless steel, tungsten carbide and materials containing refractory metals in instances where there is a need for a higher temperature flux with improved wetting.

It is recommended for improving wetting of the filler metal on cemented tungsten carbide.

It is also used for tungsten carbide backed PCD and refractory metals.

TENACITY No. 5A Flux Powder has good ‘temperature-time stability’ and overheat resistance.

TENACITY No.3A Flux Paste is a non-standard boron modified flux for use on stainless steel, tungsten carbide and materials containing refractory metals.

It is recommended for improving wetting of the filler metal on cemented tungsten carbide.

It is also used for tungsten carbide backed PCD and for grades of cast iron.

TENACITY No.4A Flux Powder is a medium temperature flux intended for use with lower silver content brazing filler metals or where a higher working range flux is needed.

It is recommended for silver brazing where a higher working range flux is needed such as with lower silver content filler metals. TENACITY No. 4A Flux Powder is also used for brazing large copper alloy components and phosphorus containing filler metals.

Other
MSRR9500/130

TENACITY No. 5 Flux Powder is a high temperature silver brazing flux with a long life and wide working range. It is restrictive when molten and forms insoluble glass-like residues.

It is recommended for prolonged heating operations and large assemblies in steel or copper.

TENACITY No. 5 Flux Powder is also used on stainless steel above 700˚C and for controlling filler metal spread.

Other
MSRR9500/126

TENACITY No.20 Flux Powder is a high temperature flux designed for bronze welding/braze welding/brazing with ArgentelTM brass type filler metals.

It is recommended for bronze or braze welding operations and copper, mild and low alloy steels.

TENACITY No.20 Flux Powder is used with copper-based filler metals.

TENACITY No.125 Flux Powder is a high temperature flux powder suitable for use with ARGENTEL™ and JM BRONZE™ filler metals.

It is used on mild and low alloy steels and tungsten carbide.

It is also recommended to use it with copper-based brazing filler metals and JM BRONZE filler metals such as F BRONZE™.

TENACITY No.125 Flux Paste is a high temperature flux paste suitable for use with ARGENTEL™ and JM BRONZE™ filler metals.

It is used on mild and low alloy steels and tungsten carbide.

It is recommended to use with copper-based brazing filler metals and JM BRONZE filler metals such as F BRONZE™.

TENACITY No. 2 Modified Flux Powder is formulated for use as a flux for coating silver brazing rods. It is a specially milled white flux powder which is active early in its working range.

TENACITY No. 14 Flux Powder is a specialised silver brazing flux used on brass where red staining due to oxidation of zinc is a problem.

It is recommended for brass where red staining is a problem and low temperature hand torch brazing operations.

TENACITY No. 14 Flux Powder is being active early in its working range.