Karstedt catalysts

Karstedt catalysts promote a quick, low temperature curing of the hydrosilylation reaction. They form silicone elastomers through an addition curing cross-linking reaction between Si-vinyl and Si-H groups. The fast cure version is a high activity form of Karstedt catalyst promoting rapid curing under ambient conditions, used to cross-link silicone polymers in two-part RTV silicone systems.

In the catalyst, platinum is in the zero oxidation state with no co-ordinated chlorides.

Chemical formula
Pt2(1,1,3,3-tetramethyl-1,3-divinyldisiloxane)3

 

Product family
Pgm compound solution (organic) 

 

CAS number
68478-92-2

 

Process

Hydrosilylation

 

Market
Silicones

Benefits of Karstedt catalysts include:

  • High stability with low colour and turbidity
  • Cross-linking between the vinylsiloxane and silyl is possible at temperatures below 50°C with no by-product formation.
  • Being supplied in solution for easy dosing and formulation

We provide formulations to meet your specific process and through our advanced manufacturing processes we ensure tight controls on catalyst concentration, stability, viscosity and inhibition. If it is not listed on this site please contact our technical team with your specific requirements.

Platinum content Viscosity Form Product codes * SDS 
0.05% (0.04-0.06 % w/w)  500 cSt  Liquid  UK: 189142  Download 
0.1% (0.08 – 0.12 % w/w)  500 cSt  Liquid 

UK - 189131

CN - FM04PT0003 

Download

Download

1% (0.8 – 1.2 % w/w)  500 cSt  Viscous liquid  US - C1218A or C1218AF
(fast cure)
 
Download
Download 
1% (0.8 – 1.2 % w/w)  1000 cSt  Viscous liquid 

UK - 189134

US - C1219 or C1219F
(fast cure) 

Download

Download
Download

2% (1.8 – 2.2 % w/w)  200 cSt  Viscous liquid  US - C1148 or C1148F
(fast cure)
 
Download
Download 
2% (1.8 – 2.2 % w/w)  500 cSt  Viscous liquid  US – C1218B  Download 
2% (1.8 – 2.2 % w/w)  1000 cSt  Viscous liquid 

UK - 189138

US – C1142A or C1142AF
(fast cure)
 

Download

Download
Download

10% (8 – 11.5 % w/w)  200 cSt  Liquid, flammable 

UK – 189132 

Download 
10% (8 – 11.5 % w/w)  500 cSt  Liquid, flammable 

UK – 189122 

Download 
10% (9.8 – 10.2 % w/w)  1000 cSt  Viscous liquid  US - C1220  Download 

* products can be ordered worldwide using these product codes

Colour: colourless/light yellow

Platinum content Form Product codes * Colour SDS 
1.5% (1.45 – 1.55 % w/w)  Liquid, flammable 

UK – 189124 

Colourless/light yellow  Download 

* products can be ordered worldwide using these product codes

 Promotes the hydrosilylation reaction in addition cure systems at elevated temperature, with a long pot life at room temperature.

Platinum content Form Product codes* Colour SDS
2% (1.8 – 2.2 % w/w)  Liquid, flammable  US – C1156  Yellow  Download 

*products can be ordered worldwide using these product codes

This stabilised Karstedt catalyst formulation provides a long pot life plus rapid curing with low product yellowing when heated.

Chemical formula
Pt(2,4,6,8-tetravinyl-2,4,6,8-tetramethyl-cyclotetrasiloxane)x

CAS number
68585-32-0

Platinum content Form Product codes* Colour SDS
2% (1 – 3 % w/w)  Liquid  UK – 189129  Colourless/pale yellow  Download 
2-5% (2.0 – 5.0 % w/w)  Liquid 

UK - 189140 

Colourless/pale yellow  Download 
3% (2.4 – 3.6 % w/w)  Liquid  UK - 189136  Colourless/pale yellow  Download 

*products can be ordered worldwide using these product codes

Platinum content Form Product codes* Colour SDS
2.1 – 3.3 % w/w  Liquid 

UK – 189121

US: C1217

Colourless/pale yellow 

Download

Download

*products can be ordered worldwide using these product codes

Platinum content Form Product codes* Colour SDS
9% (8 - 11 % w/w)  Liquid, flammable 

UK - 189123

CN - FM04PT0004 
Yellow 

Download

Download

*products can be ordered worldwide using these product codes

The high Pt concentration in this Karstedt catalyst allows additions of small quantities of catalyst to formulation batches.

Platinum content Form Product codes* Colour SDS
20% (19 – 21.5 % w/w)  Liquid, flammable 

UK - 189125

US - C1159 
Yellow 

Download

Download

*products can be ordered worldwide using these product codes

FAQs

It depends on the platinum concentration and the formulation; Please refer to the relevant safety data sheets and handling advice provided.

9% Karstedt is stable at room temperature, 20% Karstedt concentrate is more temperature sensitive and should be kept refrigerated.

In general, Karstedt catalysts are not particularly light sensitive but we advise storage out of direct sunlight.

The product is immiscible with water; high moisture levels can cause turbidity in the catalyst (for example transient turbidity when the bottle is removed from the fridge). If there is a lot of water present then decomposition can sometimes be seen at the water/organic solvent phase boundary.

The Karstedt catalyst is not highly moisture sensitive so moisture removal is probably not required. A small amount of platinum will be lost into the molecular sieves thereby slightly reducing its catalytic activity. This will probably counteract any advantage of using molecular sieves to dry it.

Both hydrosilylation and condensation can be used to make silicone polymers, however there is increasing concern about the health risks of Sn. Condensation also produces water as a by-product, affecting the shape of the final silicone; hydrosilylation offers better shape control as there is no by-product from the addition reaction.

Karstedt catalyst is a homogeneous catalyst and requires a lower Pt loading than heterogeneous (supported) catalysts where less of the Pt sites are available for reaction. However, with a liquid product it may be possible to filter off the supported Pt catalyst and either reuse it or recover platinum from it. Solid catalysts vary in activity: Adam’s catalyst (PtO2) is quite a basic catalyst and the activity is not particularly high. We recommend Pt/SiO2type 210 as a more active heterogeneous catalyst.

If Hgas evolution from a side reaction of the silane reagent with water becomes a problem, palladium black 400/3A at 10 - 15 ppm is effective at removing hydrogen, or 5% Pd on calcium carbonate can also be used. These products will add some colour to the final product.

Common poisons are amines, phosphorus compounds, sulphur compounds, arsenic and tin. Where tin is used to catalyse condensation curing, it is best to alter the process order with any Sn catalysed condensation steps after the hydrosilylation step.

Karstedt catalyst in tetravinyltetramethylcyclotetrasiloxane and rhodium hydrosilylation catalysts can help improve poison resistance.

Poisoning is not always bad and can sometimes modify the activity and selectivity in a beneficial way.

Karstedt catalyst is active over a wide range of conditions, which will depend on your particular reaction and application. As a starting point, we suggest:

  • Pt loading 100 ppm
  • Reaction temperature 20-200 °C
  • No solvent or toluene, xylene, hydrocarbons, ethers or siloxanes

As hydrosilylation performance is sensitive to the reagents and conditions used, we do not supply test data unless under an non-disclosure agreement with a specific customer.

Platinum dodecene chloride solution and platinum (cyclooctadiene) dichloride are more thermally stable than the Karstedt catalyst and can be used for difficult hydrosilylation reactions with a sustained high temperature. Platinum dodecene chloride is orange-brown and will affect the colour of the final product.

Get in touch

Emir Hubijar

Emir Hubijar

Americas and Asia

  • +1 856 384 7000
Send a message
Torsten Buennag

Torsten Buennagel

Europe and Asia

  • +44 (0)1763 253 000
Send a message