Clear All

Showing results 81-120 / 632

Pre-reforming catalysts

Johnson Matthey has a long legacy in pre-reforming catalysts dating back to the 1960s and offers the CRG series of catalysts.

Explore

Formaldehyde plant range

The latest FORMOX™ plant design is a step further in the evolution of our plant technology.

Explore

Nickel bearing

NICKELBRAZE™ filler metals are used to join stainless steel, nickel and cobalt base alloys.

Explore

Reforming catalysts

Optimise SMR with Johnson Matthey's unique reforming catalysts for ammonia, methanol, hydrogen, and GTL. Efficiently reforming a wide range of feedstocks.

Explore

Choline chloride process

Our DAVY™ choline chloride technology includes a continuous single-stream process in which ethylene oxide, hydrochloric acid, trimethylamine (TMA) are reacted under moderate conditions to produce choline chloride.

Explore

SIL-FOS filler metals

SIL-FOS™ filler metals are recommended for the fluxless brazing of copper.

Explore

TENACITY products

View information on a number of our TENACITY™ flux powders and pastes.

Explore

Getters absorbents

PROTELEC getter materials are used to ensure a hermetic (sealed) environment is available within electronics packages such as source lasers, gyroscopes, microwaves and medical packaging, to prevent premature device failure.

Explore

CO oxidation FCC additives

Johnson Matthey's CO oxidation FCC additives include platinum and non-platinum promoters for effective afterburn control and CO emissions reduction.

Explore

Turbocharger and steam utilisation process

In most high power cost situations, a turbocharger is the preferred design with short payback on the extra investment.

Explore

Tetrammine palladium nitrate solution (TPDN)

Tetrammine palladium(II) nitrate solution | CAS: 13601-08-6

Explore

C=O reduction kit

This kit contains 17 alcohol dehydrogenase (ADH) enzymes for the reduction of ketones and aldehydes to the corresponding alcohols.

Explore

Methanol process

Johnson Matthey is one of the world’s leading methanol technology and catalyst providers, with over half of the world’s licensed methanol plants based on our DAVY™ technology.

Explore

Pd-100

Bis(triphenylphosphino)palladium chloride | CAS: 13965-03-2

Explore

Fischer Tropsch technology

Johnson Matthey have collaborated with BP to produce our proprietary fixed-bed Fischer Tropsch (FT) technology – a simple and robust system which forms the heart of our gas-to-liquids (GTL) process.

Explore

Bottoms upgrading FCC additive

Information on bottoms upgrading FCC additive.

Explore

Ir-113, iridium trichloride solid

Iridium(III) chloride solid | CAS: 14996-61-3

Explore

Karstedt catalysts

Explore our range of Karstedt catalysts.

Explore

Steam methane reforming catalysts

Selecting the right steam methane reforming catalyst is crucial for the production rates and plant efficiency of hydrogen, ammonia and methanol plants.

Explore

Coatings and surface solutions

Our innovative and customised coatings and surface solutions enable new technologies for medical devices by enhancing surface functionality of various metallic, polymeric, and ceramic components.

Explore

10R128M | 10% Platinum/Carbon

10% Platinum/Carbon

Explore

Ethanolamine hexahydroxyplatinic acid (Platinum EA solution)

Ethanolamine hexahydroxyplatinic acid

Explore

Platinum plating salts

In a Proton Exchange Membrane (PEM) electrolysis cell, two bipolar plates surround the membrane and electrodes. These transport water and product gases to and from the membrane, as well as conducting electricity and circulating coolants.

Explore

Thermocouple wire

Our precious metal thermocouples are internationally renowned for highly accurate and reliable temperature measurement.

Explore

Hydroformylation catalyst

Johnson Matthey offers a complete range of rhodium compound catalysts for the hydroformylation reaction, including rhodium chloride, rhodium acetate or the original Wilkinson catalyst RhCl(PPh3)3.

Explore

Hydroprocessing catalysts

Johnson Matthey offers a range of high quality hydroprocessing catalysts to the global refinery market.

Explore

Dimethyl formamide (DMF) process

Dimethyl formamide (DMF) is produced by reacting dimethylamine with carbon monoxide in the presence of a catalyst at low temperature and pressure in a specialised reactor. Johnson Matthey license the DAVY™ DMF process, which is well-proven commercially.

Explore

Methane oxidation catalysts

Clean air solutions: our system offers cost-effective, low-temperature oxidation of methane from active and abandoned coal mines.

Explore

Mixed oxide catalyst pellets and honeycombs

Clean air solutions: Johnson Matthey’s SINOx® mixed oxide catalysts can be used alone or in combination with precious metal oxidation catalysts for more efficient and economical catalyst systems.

Explore

Pt-112

Bis(diethylsulphide)platinum(II) chloride | CAS: 15337-84-5

Explore

Buchwald palladacycle kit

This kit contains a range of 2nd and 3rd generation Buchwald palladacycles that are air stable complexes and can be rapidly activated under mild conditions.

Explore

OROBRAZE

Gold-copper OROBRAZE™ filler metals show good wetting on Fe, Ni, Co, Ta, Nb and W.

Explore

Platinum blacks

Explore our range of platinum black products.

Explore

Platinum P Salt in ammonia

Diamminedinitroplatinum(II) in ammoniacal solution | CAS: 14286-02-3

Explore

Piezo and next generation technology development

Our Piezo actuators, sensors, and atomizers have wide applications in drug delivery, robotics, prosthetics, BCI and ultrasound technologies.

Explore

ZSM additives

When propylene demand is high, Johnson Matthey’s ZSM-5 based additives are highly selective for cracking low octane gasoline range molecules to C3 and C4 olefins with no increase in coke or C2 and lighter gases.

Explore

Solvent purification

For more than 20 years, many customers worldwide have successfully used HTC™ in solvents, fuels, white oils, waxes and other similar applications for de-aromatisation, desulphurisation and removal of undesirable and/or toxic aromatic and olefinic species from solvent streams using hydrogenation.

Explore

PALLABRAZE - filler metals

PALLABRAZE™ products can be used to braze a variety of materials from stainless steel to metalised ceramics.

Explore

Tetrammine palladium chloride (TPDC)

Tetrammine palladium(II) chloride solution | CAS: 13815-17-3

Explore

MODULEX and DUALOX catalytic converters and converter-silencers

Clean air solutions: Johnson Matthey's MODULEX and DUALOX® catalytic converters for stationary engines were developed to satisfy the increasing demand for clean air technology combined with silencing.

Explore