All products and services

Chloroiridic acid solution (CIA)

Hydrogen hexachloroiridate (IV) solution | CAS: 16941-92-7

Palladium chloride solution 20-25% w/w Pd

Hydrogen tetrachloropalladate(II) solution | CAS: 85129-17-5

Bronze filler metals

JM BRONZE™ filler metals are a range of special products designed for high temperature brazing of steel and carbide components.

Ru-112

Hexakis(acetato)triaquo-µ-oxotriruthenium(III) acetate solution, ruthenium acetate solution | CAS: 55466-76-7

Potassium hexachloroplatinate

Potassium hexachloroplatinate(IV) | CAS: 16921-30-5

Metallurgical solutions

We offer solutions including testing and characterisation, rapid product prototyping, inventory management, refining, recycling and metal management.

Platinum nitrate

Platinum nitrate solution | CAS: N/A

Nitrous oxide abatement catalyst

Through our co-operation with Yara International ASA, we supply high performance secondary nitrous oxide abatement catalysts.

Palladium blacks

Explore our range of palladium blacks.

NOx storage catalyst (NSC)

Mobile emission controls: Johnson Matthey’s NSC technology removes NOX from a lean gas stream and converts it to N2.

Fuel processor catalysts

The HIFUEL® catalyst range is designed specifically for distributed hydrogen generation systems such as those used in reformate fuel cell applications.

Metal additive manufacturing

Additive manufacturing of speciality metal powders is a cost effective method of making complex shapes and iterative designs with reduced lead times.

Soldering fluxes

Soft solder fluxes are available in forms with both corrosive and intermediate/low corrosivity residues.

E101023-4/1

F101023-4.5/0.5

Selective Catalytic Reduction Filter® (SCRF®)

Mobile emission controls: the SCRF® system integrates Selective Catalytic Reduction (SCR) with a soot filter – the next step for diesel nitrogen oxide control.

Selective catalytic reduction (SCR)

Mobile emission controls: selective catalytic reduction (SCR) systems work by chemically reducing nitrogen oxide to nitrogen.

Chloroplatinic acid crystal (CPA)

Hydrogen hexachloroplatinate(IV) crystal | CAS: 16941-12-1

Pd-191

CAS Number: 1846557-10-5 | [SPhos Pd(allyl)]OTf

Tetrammine palladium nitrate solution (TPDN)

Tetrammine palladium(II) nitrate solution | CAS: 13601-08-6

Methanol process

Johnson Matthey is one of the world’s leading methanol technology and catalyst providers, with over half of the world’s licensed methanol plants based on our DAVY™ technology.

Fischer Tropsch technology

Johnson Matthey have collaborated with BP to produce our proprietary fixed-bed Fischer Tropsch (FT) technology – a simple and robust system which forms the heart of our gas-to-liquids (GTL) process.

Ir-113, iridium trichloride solid

Iridium(III) chloride solid | CAS: 14996-61-3

Karstedt catalysts

Explore our range of Karstedt catalysts.

Coatings and surface solutions

Our innovative and customised coatings and surface solutions enable new technologies for medical devices by enhancing surface functionality of various metallic, polymeric, and ceramic components.

10R128M | 10% Platinum/Carbon

10% Platinum/Carbon

5R395

Ethanolamine hexahydroxyplatinic acid (Platinum EA solution)

Ethanolamine hexahydroxyplatinic acid

Thermocouple wire

Our precious metal thermocouples are internationally renowned for highly accurate and reliable temperature measurement.

Methane oxidation catalysts

Clean air solutions: our system offers cost-effective, low-temperature oxidation of methane from active and abandoned coal mines.

Mixed oxide catalyst pellets and honeycombs

Clean air solutions: Johnson Matthey’s SINOx® mixed oxide catalysts can be used alone or in combination with precious metal oxidation catalysts for more efficient and economical catalyst systems.

Pt-112

Bis(diethylsulphide)platinum(II) chloride | CAS: 15337-84-5

Buchwald palladacycle kit

This kit contains a range of 2nd and 3rd generation Buchwald palladacycles that are air stable complexes and can be rapidly activated under mild conditions.

OROBRAZE

Gold-copper OROBRAZE™ filler metals show good wetting on Fe, Ni, Co, Ta, Nb and W.

Platinum blacks

Explore our range of platinum black products.

Platinum P Salt in ammonia

Diamminedinitroplatinum(II) in ammoniacal solution | CAS: 14286-02-3

Piezo and next generation technology development

Our Piezo actuators, sensors, and atomizers have wide applications in drug delivery, robotics, prosthetics, BCI and ultrasound technologies.

ZSM additives

When propylene demand is high, Johnson Matthey’s ZSM-5 based additives are highly selective for cracking low octane gasoline range molecules to C3 and C4 olefins with no increase in coke or C2 and lighter gases.

PALLABRAZE - filler metals

PALLABRAZE™ products can be used to braze a variety of materials from stainless steel to metalised ceramics.

Tetrammine palladium chloride (TPDC)

Tetrammine palladium(II) chloride solution | CAS: 13815-17-3

MODULEX and DUALOX catalytic converters and converter-silencers

Clean air solutions: Johnson Matthey's MODULEX and DUALOX® catalytic converters for stationary engines were developed to satisfy the increasing demand for clean air technology combined with silencing.

5R611

5T761

A-2000

10T755

EASY-FLO products

EASY-FLO™ products are general-purpose silver brazing fluxes. They can be used on the common engineering metals including copper, copper alloys, nickel alloys, steel, stainless steel and tungsten carbide.

STOP-FLO brazing products

STOP-FLO™ No.1 and STOP-FLO No.2 are two stop-off or ‘parting’ compounds formulated to prevent the flow and wetting of molten brazing filler metal across the surface of a component during the brazing process.

Copper brazing filler metal

The ARGENTEL™ range of products are designed for the brazing of steel or copper components and also for brazing steel to tungsten carbide in tooling applications.

Soft solders

See our range of lead-free, silver-lead, tin-lead and low-melting indium soft solders.

Potassium tetrachloroplatinate

Potassium tetrachloroplatinate(II) | CAS: 10025-99-7

5R289 Powder

Tube

We have a range of high quality platinum group metal (pgm) tube used in industrial and jewellery applications, available in a range of materials, diameters and shapes.

Ruthenium chloride solid

Ruthenium(III) chloride solid | CAS: 10049-08-8

QuadraPure TU

Polymer beads for metal impurity removal and value recovery

Ashby’s catalyst, 2% platinum

CAS: 68585-32-0

Catchment/Getter gauze

We supply palladium nickel catchment gauzes for recovering lost volatilised platinum from catalyst gauzes.

Care and use of laboratory apparatus

Correctly caring for your precious metal apparatus will provide a service life unrivalled by another other material.

Platinum labware

We manufacture platinum labware, including crucibles and dishes, to provide maximum service life, with the bases being thicker than the walls. The capacities and shapes available meet most laboratory requirements and we can custom make other products. Most of our crucibles and dishes are made from 99.7% platinum with small additions of iridium and rhodium, but other materials are available.

Precious metal recovery

We offer innovative solutions for effective cleaning of plant components through onsite and offsite aggressive and non-aggressive techniques.

Precious metal and nitinol materials for medical devices

Johnson Matthey offers high quality pgm and nitinol materials used in your R&D or high-volume manufacturing phase of the medical device process.